2008 CayenneS Low Beam out - Dorkiphus.net
Navigation » Dorkiphus.net > Technical & Track Disussions > Other Technical Discussions » 2008 CayenneS Low Beam out

Other Technical Discussions A place for technical discussions NOT related to Porsche or BMW. Other makes, home DIY, etc.

Reply
Page 1 of 2 1 2
 
Thread Tools Display Modes
  #1  
Old 10-13-2022, 01:55 PM
Chopper Dropper's Avatar
Chopper Dropper Chopper Dropper is offline
 
Join Date: Apr 2004
Location: Easton, Md
Posts: 3,241
Chopper Dropper
Default 2008 CayenneS Low Beam out
Drivers side low beam quit. Have replaced bulb (Xenon) twice, no luck they were cheap, also replaced the fuse. The harness looks OK from what I can see. Stumped
Dirk
__________________
Safety Chair, PCA Potomac Region
Retired DE Chair, PCA Potomac Region.
Retired Co-Chief Instructor PCA Potomac 2008-2012
1971 914/6 (Factory) 3.2 Track car
1988 911 Targa
1986 944
Reply With Quote
  #2  
Old 10-13-2022, 02:24 PM
cmartin's Avatar
cmartin cmartin is offline
 
Join Date: Sep 2003
Location: Pasadena, MD
Posts: 7,648
cmartin
Default


switch on, power at the connector?
connector clean, not green?
resistance of power wire?
resistance of ground?
__________________
78 SC, the 'Red Car'
Reply With Quote
  #3  
Old 10-13-2022, 02:44 PM
Chopper Dropper's Avatar
Chopper Dropper Chopper Dropper is offline
 
Join Date: Apr 2004
Location: Easton, Md
Posts: 3,241
Chopper Dropper
Default
Quote:
Originally Posted by cmartin View Post


switch on, power at the connector?
connector clean, not green?
resistance of power wire?
resistance of ground?
Will try that when dry out, all looks good visually, Not sure I can check resistance with what I have, just have a simple bulb tester.
Thanks
Dirk
__________________
Safety Chair, PCA Potomac Region
Retired DE Chair, PCA Potomac Region.
Retired Co-Chief Instructor PCA Potomac 2008-2012
1971 914/6 (Factory) 3.2 Track car
1988 911 Targa
1986 944
Reply With Quote
  #4  
Old 10-13-2022, 03:52 PM
joep's Avatar
joep joep is offline
 
Join Date: Jun 2008
Location: PW county Virginia
Posts: 2,555
joep
Default
Did you check if your affected by this recall? Mine loves to "blink" whenever I come to a fast stop as the whole unit is shifting around sometimes.

https://www.motorauthority.com/news/...adlight-covers
__________________
Ken
'03 - boxster - Joy Toy
-rolling convertible action
-de-ambered
-Boxster Brey-Krause Roll Bar
'05 - 955s Gold - My Other / On Road / Off Road
-coolant pipe by pass 08/11
-heart & short soul block replaced @50k 01/12
-cardan shafted & replaced @125k 09/16

Quote:
Originally Posted by BlackTalon View Post
I could feel my self-esteem rising, even while realizing how incorrect I was
Quote:
Originally Posted by Rick V View Post
I think I like the purple, it placates my lesbian side.
Reply With Quote
  #5  
Old 10-13-2022, 04:11 PM
Chopper Dropper's Avatar
Chopper Dropper Chopper Dropper is offline
 
Join Date: Apr 2004
Location: Easton, Md
Posts: 3,241
Chopper Dropper
Default
Quote:
Originally Posted by joep View Post
Did you check if your affected by this recall? Mine loves to "blink" whenever I come to a fast stop as the whole unit is shifting around sometimes.

https://www.motorauthority.com/news/...adlight-covers
I saw the recall don't think it has anything to do with this, all seems tight and the recall s just to limit the focus adjustment up or down. Had no problem till returning from HPDC the other weekend when as leaving I was told light was out.
__________________
Safety Chair, PCA Potomac Region
Retired DE Chair, PCA Potomac Region.
Retired Co-Chief Instructor PCA Potomac 2008-2012
1971 914/6 (Factory) 3.2 Track car
1988 911 Targa
1986 944
Reply With Quote
  #6  
Old 10-13-2022, 10:04 PM
turbo23dog's Avatar
turbo23dog turbo23dog is offline
 
Join Date: Jan 2005
Location: No. VA
Posts: 1,386
turbo23dog
Default
Search Headlight Ballast at

https://rennlist.com/forums/cayenne-...-2003-2010-77/

There are many postings about ballast going bad as a fail for xenon headlights. After replacement, PWIS is needed to properly code the new part.

Good luck.
__________________
Rich F.

2017 BMW M240 xDrive Vert
2004 BMW 330Ci Coupe (DD)
1996 BMW 328i
2006 Cayenne S
1980 SC Targa (A1R KULD)

Gone but not forgotten:
2010 Boxster S (sold)
2000 Boxster S (sold)
73 911T Targa (sold)
67 912 (sold)
Reply With Quote
  #7  
Old 10-14-2022, 09:15 AM
Chopper Dropper's Avatar
Chopper Dropper Chopper Dropper is offline
 
Join Date: Apr 2004
Location: Easton, Md
Posts: 3,241
Chopper Dropper
Default
Quote:
Originally Posted by turbo23dog View Post
Search Headlight Ballast at

https://rennlist.com/forums/cayenne-...-2003-2010-77/

There are many postings about ballast going bad as a fail for xenon headlights. After replacement, PWIS is needed to properly code the new part.

Good luck.
Thanks Steve, will look into it today
Dirk
__________________
Safety Chair, PCA Potomac Region
Retired DE Chair, PCA Potomac Region.
Retired Co-Chief Instructor PCA Potomac 2008-2012
1971 914/6 (Factory) 3.2 Track car
1988 911 Targa
1986 944
Reply With Quote
  #8  
Old 10-14-2022, 09:35 AM
Chopper Dropper's Avatar
Chopper Dropper Chopper Dropper is offline
 
Join Date: Apr 2004
Location: Easton, Md
Posts: 3,241
Chopper Dropper
Default
Quote:
Originally Posted by turbo23dog View Post
Search Headlight Ballast at

https://rennlist.com/forums/cayenne-...-2003-2010-77/

There are many postings about ballast going bad as a fail for xenon headlights. After replacement, PWIS is needed to properly code the new part.

Good luck.
Steve do you need to replace both sides at same time ?
__________________
Safety Chair, PCA Potomac Region
Retired DE Chair, PCA Potomac Region.
Retired Co-Chief Instructor PCA Potomac 2008-2012
1971 914/6 (Factory) 3.2 Track car
1988 911 Targa
1986 944
Reply With Quote
  #9  
Old 10-14-2022, 01:45 PM
Chopper Dropper's Avatar
Chopper Dropper Chopper Dropper is offline
 
Join Date: Apr 2004
Location: Easton, Md
Posts: 3,241
Chopper Dropper
Default
Quote:
Originally Posted by Chopper Dropper View Post
Thanks Steve, will look into it today
Dirk
Swapped Ballast side to side and one bad ballast, so finally know what the problem is. Without spending $500 or so per side, do I need to do both at same time and what is a reasonable replacement
Dirk
__________________
Safety Chair, PCA Potomac Region
Retired DE Chair, PCA Potomac Region.
Retired Co-Chief Instructor PCA Potomac 2008-2012
1971 914/6 (Factory) 3.2 Track car
1988 911 Targa
1986 944
Reply With Quote
  #10  
Old 10-14-2022, 02:43 PM
Patrick3000's Avatar
Patrick3000 Patrick3000 is offline
I need another Porsche
  
Join Date: Mar 2005
Location: Maryland
Posts: 3,158
Patrick3000
Default
Quote:
Originally Posted by Chopper Dropper View Post
Swapped Ballast side to side and one bad ballast, so finally know what the problem is. Without spending $500 or so per side, do I need to do both at same time and what is a reasonable replacement
Dirk
I don’t know anything about the quality of these.

https://www.rockauto.com/en/catalog/...+ballast,15962
__________________
Karl

Lucky owner of a couple 911s
1963 LeMans Convertible 336 HO V8 with a manual 3 speed
1965 Honda Sport 50
Reply With Quote
Reply
Page 1 of 2 1 2

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump