[rtuey]

I appreciate the feedback I got on my last clutch questions. A few more questions. The Bentley's writes about asbestos fibers. Is that still an issue if the original clutch had been replaced at 99K miles?

Next, as I prep to do the clutch, I was wondering how much really needs or should be replaced. Pelican sells the '82SC clutch rebuild kit for $1105. I can buy the parts individually for the same overall price. Can you offer some more advice on whether I need or should replace all of the items in the kit? Is it really necessary to replace items like:
- clutch cable
- Clutch arm help spring
- flywheel pilot bearing
- throw-out bearing clutch release fork

The kit includes the following items:
930-102-042-00-M157
Flywheel Pilot Bearing w/housing, 911 (1980-86), 911 Turbo (1979-88) from eng# 689 0505 (49 state) or 689 1232 (calif) Brand: Rauch & Spiegel
1 $35.00

930-116-617-00-OEM Helper Spring Spacers, 911 (1978-86)
1 $3.25

930-423-401-05-M74
Clutch Cable (w/hooked end), 911 (1977-86), 911 Turbo (1978-88) Brand: Gemo
1 $75.50

900-027-015-03-OEM
B8 Lock Washer
9 $0.75

900-036-016-02-OEM
Assembly Lower Cover, 911 (1978-86)
1 $4.00

900-067-090-02-M260
Pressure Plate Bolt (sold per each, 9 required), 911 (1972-86) Brand: O.E.M.
9 $2.00

900-095-050-00-OEM
Throw-Out Bearing Release Fork Roll Pin, 911/911 Turbo (1972-88)
1 $1.50

900-234-502-01-OEM
Helper Spring Washer, 911 (1978-86)
1 $2.00

999-701-209-40-OEM
Helper Spring Upper O-Ring, 7.3x2.4mm, 911 (1978-86)
1 $2.25

999-701-359-40-M30
O-ring, 40x1.5, for 915 throwout guide tube, and late 914 shift shaft housing. Brand: Elring Klinger
1 $1.50

N012-408-2-OEM
Helper Spring Upper Circlip, 911 (1978-86)
1 $1.00

N-012-418-1-OEM
Throw-Out Lever Shaft Lower Circlip, 911 (1974-86), 911 Turbo (1976-88)
1 $1.00

915-116-001-27-M38
Clutch Pressure Plate, Cast Iron, 225 mm, 911 (1972-86), 924 turbo Brand: Sachs
1 $306.25

915-116-011-22-M38
Spring-Center Clutch Disc, 225 mm
Brand: Sachs
1 $221.50

915-116-064-01-M260
Clutch Arm Helper Spring, 911 (1978-86) Brand: O.E.M.
1 $81.75

915-116-082-80-M38
Throw Out Bearing, 911 (1972-86)
Brand: Sachs
1 $167.50

915-301-139-00-M30
Throw-Out Lever Seal (sold per each), 911 (1972-77, 1 req.), 911 (1976-77, 3 req.), 911 Turbo (1976-77, 2 req.) Brand: Elring Klinger
3 $2.50

PEL-TOL-CA2
Clutch Alignment Tool, (Spline count = 20; Pilot diameter = 14.9 mm; Spline diameter = 22.2 mm)
1 $8.85

915-116-614-02-M260
Backlash Spring, 911/911 Turbo (1977-86) Brand: O.E.M.
1 $9.00

915-116-712-01
Throw-Out Bearing Clutch Release Fork
1 $112.50

930-102-206-00-M58
Flywheel Bolt, Crankshaft to Flywheel (sold per each) Brand: O.E.M.
9 $2.00

999-113-426-41-M204
Flywheel Seal, 924S/944/968 All, 911/911 Turbo (1978-89), 996 Turbo (2001-03) Brand: Kaco
1 $20.50

Thanks again.