[cmcfaul@aol.com]

I moved south of the beltway and need head work. I have all the parts, need valve guides replaced, valves cut and sealed, heads reassembled, etc. I would usually take this to IMA, ASG or Chapman which used to be local to me (and I still may). Any recommendation closer to just south of the beltway, Springfield / Woodbridge area?

Many thanks,

Chris
89 Carrera

[BlackTalon]

Try RPM in Newington. Longtime Porsche guys and DE/ Club Race participant. One of the original owners' sons runs the operation these days, I believe. They work on all makes, but may still have a bit of that air-cooled knowledge in-house.

[cmcfaul@aol.com]

Thanks David,

They are close. I just reached out to them. See where it goes from here.

Chris

[TurboPooch]

Billy Ring at Performance Auto Works near Summit Point.

[BlackTalon]

Originally Posted by TurboPooch

Billy Ring at Performance Auto Works near Summit Point.

Reading comprehension, sir...

[Dr K]

Originally Posted by TurboPooch

Billy Ring at Performance Auto Works near Summit Point.

Originally Posted by BlackTalon

Reading comprehension, sir...

Yes, but Billy Ring is a master with air-cooled engines. He used to work with Dave Coleman, and he redid the top end of my fancy Peter Dawe engine when I over-revved the '86 race car. It was just as smooth and powerful as when Peter Dawe did it. WORTH THE DRIVE!. https://www.performanceautoworkswv.com

Peter

[Casey914]

I live near Springfield. I would still have my headwork done at burtonsville machine shop.

[Patrick3000]

Originally Posted by TurboPooch

Billy Ring at Performance Auto Works near Summit Point.

^^^

Call Billy and make the drive to Summit Point, you will be glad that you did

[TurboPooch]

Originally Posted by BlackTalon

Reading comprehension, sir...

I understood. If he wants quality work over convenience, he will drive.

[BlackTalon]

Originally Posted by TurboPooch

I understood. If he wants quality work over convenience, he will drive.

He doesn't -- even Merrifield is not desirable.