[forklift]

I posted in the 964 FS forum here: https://rennlist.com/forums/964-foru...l#post19162613

1 set of Fikes is sold, same with the RSA wheels (both pending payment) but the set with the R7s are still for sale. They are located in /near Tampa but I an bring to the Sebring race also which is only - damn, 5 or so weeks away.

From the ad, edited for update: 2 sets of 18" Fikse FM-10, polished silver, 8's and 9's.. They are in good track condition, meaning great looking from 10' away - my track pic in my avatar is a set and more pics of one set below.

One set has a set of Hoosier R7s. I think they only have 2-3 HCs but just in case, we'll say 4-5 HC's. They are dated 51/20 (very end of 2020 for both 275s), a 46/21 (fall of 2021) 225 and a 21/21 225. They are 225/40/18 and 275/35/18. I don't know the offsets but ran without spacers - but do note that the front max width for R7's is 225; which is almost the exact same size as the 245 R6s. So if R6s were still around (when I got the barrels changed), they would run 245s, but with R7s I ran 225s, as the 245 R7s rub a little on the outside(but 245 R6s did not). These wheels look fantastic from 10' away and are light. If I still owned my car, I would still be driving these.

Pic in the rennlist ad.

Lowering to $1,100 + actual shipping charges (free delivery to Sebring in Feb).

[Shifted]

What are their ETs? Sorry, if I missed them in the ad...

[N Fotouhi]

Jim,
Hope all is well in FL. I can’t believe you sold the RSA. I guess all good things come to an end.
Please send me a PM about the Cup 1 wheels. I have been interested to grab a set at a reasonable (?) price.

[forklift]

Originally Posted by Shifted

What are their ETs? Sorry, if I missed them in the ad...

In the ad, "I don't know the offsets but ran without spacers - but do note that the front max width for R7's is 225; which is almost the exact same size as the 245 R6s. So if R6s were still around (when I got the barrels changed), they would run 245s, but with R7s I ran 225s, as the 245 R7s rub a little on the outside(but 245 R6s did not)."

I had Paul at Radial change the barrels about 10 years ago and just told him I need them to fit my 964 and they did (with the note above).

Originally Posted by N Fotouhi

Jim,
Hope all is well in FL. I can’t believe you sold the RSA. I guess all good things come to an end.
Please send me a PM about the Cup 1 wheels. I have been interested to grab a set at a reasonable (?) price.

Hi Nader,

I can't believe it either but I told myself before the finish line of the 2022 VIR race that that was my last race in the car due to my (extreme) soreness getting worse as I age. I might buy or build a pdk DE car in the next few years. The desire to drive is still there and now Sebring less than 2 hours away.

Sorry but the Cup 1s are sold pending payment - I only have the 1 set of Fikes left w/ the R7s mounted.

Hope all is well in your world also.

[N Fotouhi]

Thanks Jim.

[forklift]

Fikses are sold pending payment. R7s available and now loose, but I think would only make sense to buy local but can bring to the PCA Sebring race if interested.

[catron1]

If the FM10's fall through I am interested!

[forklift]

Cool. One of the buyers has gone silent - I'll give him another day and then will contact you if he does fall through. That set is boxed up and ready to go.

[forklift]

Ok that other buyer flaked and I have the wheels and tires separated. Wheels at $950 and tires at $150 + actual shipping.