Navigation » Dorkiphus.net
»
power steering pulley remover and installer
| Tools Needed/For Loan If you need to borrow some tools, or have tools to loan, post here. |
 |
|
|
Thread Tools | Display Modes |
|
#1
11-10-2007, 06:37 PM
|
||||
|
||||
power steering pulley remover and installer
will probably never use it again. used it to re and re power steering pump during water pump replacement on daughters 93 taurus. needed to re and re pulley on power steering pump.
|
|
#2
11-10-2007, 06:45 PM
|
||||
|
||||
I have this, if it;s what you need....
http://www.autozone.com/in_our_store...al/2_3_jaw.htm You're welcome to borrow it.
__________________
1983 911 SC Targa - 1990 944 S2
|
|
#3
11-10-2007, 11:39 PM
|
||||
|
||||
|
Steve's puller will not work on the PS pulley. There is a special puller for Ford and GM PS pulleys. What engine is in the Taurus, 3.0 or 3.8? Is it a SHO? IIRC you do not have to remove the pulley to do the job. On the 3.8 I think you undo the bracket and place the pump out of the way. I have the tool you need if you have to remove the pulley. My shop is in Manassas Park if you would like to pick it up. I may be in the Reston area Tuesday evening if you would like to meet somewhere. Shoot me a PM and let me know. Even with the tool the pulley can be very tight coming off.:XX
__________________
Searchin' for my lost shaker of salt. Clarke '79 SC Euro '93 BMW 325is '54 Chevy 210
|
|
#4
11-11-2007, 08:29 AM
|
||||
|
||||
|
I have the universal kit that will pull ford and GM Is the pump off the car? If so you can being it and we car R&R the pulley in the shop. I will be around the house/shop all sunday. Call me at 703 534 8153.
|
|
#5
11-11-2007, 08:59 AM
|
||||
|
||||
sorry about the confusing post. i have the puller and installer tool to lend out.
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
