Torque Tube Rebuilding - Dorkiphus.net
Navigation » Dorkiphus.net > Classifieds > Professional Help » Torque Tube Rebuilding

Professional Help Post local shops and businesses you trust and recommend.

Reply
 
Thread Tools Display Modes
  #1  
Old 03-06-2009, 09:25 PM
Marc A's Avatar
Marc A Marc A is offline
 
Join Date: Dec 2002
Location: Herndon
Posts: 1,529
Marc A
Default Torque Tube Rebuilding

I have been through a few torque tubes due to issues with my conversion and having to use 20 year old replacements. Fortunately, I have sourced all of the parts needed to rebuild these monsters, including having the the drive shaft collars made by a machine shop out of delrin.

Here is a picture of the puck. Old type on the left, new style on the right.

There are four of these in the tube although I am running a 5th one in the front of the tube.

The black plastic part is the drive shaft collar which is difficult to remove and save. In most cases it becomes worn due to bearing failure. I could not find these collars anywhere so I had them made.

I live in Northern Virginia and instruct for NASA, BMW, AUDI, MB, Trackdaze and a few other groups so I'm at a track at least once a month.

As we know replacing the torque tube is a major pain. More and more are going bad and there are less and less of the good used ones available. My thought was why pay $200 for an unknown commodity when for a little more I can have all new guts.

I am offering two rebuild options and assumes that your drive shaft is reusable:

1) Replace the existing bearings with OE steel bearings and delrin collars for $320.00. I would warranty the parts and workmanship for 3 years.

2) Replace the existing bearings with Ceramic Hybrid bearings and delrin collars for $404.00. I would warranty the parts and workmanship for as long as you have the tube. The specs on this bearing are unbelievable for strength and heat resistance. My set up will definitely out live my days at the track.

3) A 5th bearing would cost 55.00 for the steel bearing, 75.00 for the ceramic hybrid.

Your thoughts and comments are welcome. Shipping in and out is possible, but the cost would probably be close to $100.00 each way.

If anyone has a torque tube they don't want any more or with a damaged shaft, I would be happy to take it off of your hands.

Thanks as always.

Marc
Attached Images
 
__________________
'05 Mustang GT
'08 E350
'06 LR3
'86 951 LS1 (C-2) Gone
'77 911 3.2 (C-1) Gone
3.2 Conversion and 915 Rebuild Home Page
The 958 Conversion

Last edited by Marc A; 12-09-2012 at 12:53 PM.
Reply With Quote
  #2  
Old 03-06-2009, 09:34 PM
Trak Ratt's Avatar
Trak Ratt Trak Ratt is offline
Senior Curmudgeon
 
Join Date: Mar 2003
Location: Alexandria/Mt. Vernon, Va
Posts: 27,256
Trak Ratt has one HoF thread
Default

Very cool!!! Welcome back even if it's only a visit!
__________________
David

I hope to arrive to my death, late, in love, and a little drunk!

Just because I don't care doesn't mean I don't understand... Homer Simpson

"That's what's keeping me out of F1.... Too much mental maturity...." N0tt0n

Some cause happiness wherever they go; others whenever they go.

CHAOS, PANIC, AND DISORDER my work here is done...

Live without pretending, Love without depending, Listen without defending, Speak without offending
Reply With Quote
  #3  
Old 03-06-2009, 10:30 PM
APKhaos's Avatar
APKhaos APKhaos is offline
 
Join Date: Dec 2002
Location: McLean, VA
Posts: 3,715
APKhaos
Default

Hey Marc!
That looks VERY nice, and is a terrific solution for ageing torque tubes.

HISTORICAL NOTE:
For those who don't go back that far with Dorki, Marc was one of the original 9 Founding Dorki, and hosted the first-ever Dorki engine drop. We have pics!
That was actually before the Board was established, and long before Marc came over to the FEWC dark side [ I was first]. His 3.2 transplanted 911 was his garage experiment back then.
__________________
Tony K
PCA Potomac, Rennlist Member
89 944 Turbo
85 Carrera - Sold
TrackVision
944Cup

Last edited by APKhaos; 03-06-2009 at 11:26 PM.
Reply With Quote
  #4  
Old 03-06-2009, 10:42 PM
Marc A's Avatar
Marc A Marc A is offline
 
Join Date: Dec 2002
Location: Herndon
Posts: 1,529
Marc A
Default

Thank you David and Tony. I'm still looking for ways to help out fellow Porsche owners, just don't have the garage space I used to . . .
__________________
'05 Mustang GT
'08 E350
'06 LR3
'86 951 LS1 (C-2) Gone
'77 911 3.2 (C-1) Gone
3.2 Conversion and 915 Rebuild Home Page
The 958 Conversion
Reply With Quote
  #5  
Old 03-11-2009, 09:57 PM
Marc A's Avatar
Marc A Marc A is offline
 
Join Date: Dec 2002
Location: Herndon
Posts: 1,529
Marc A
Default

I wanted to give everyone a heads up on something I just learned about. One of the 928 companies is producing a "super torque tube bearing" (my terms not theirs). They apparently are in the process of making the same bearing for the 944 torque tube.

Here is the thread link that I ran across: http://forums.rennlist.com/rennforum...ferrerid=68196

No one seems to know how much the bearings will be, but in the interest of full disclosure and making sure that everyone knows what's out there I offer this for your consideration.

In the same thread there is a reference to a vendor who sells aluminum shaft collars. I have my reservations about using aluminum over delrin for the reasons in my post there.
__________________
'05 Mustang GT
'08 E350
'06 LR3
'86 951 LS1 (C-2) Gone
'77 911 3.2 (C-1) Gone
3.2 Conversion and 915 Rebuild Home Page
The 958 Conversion

Last edited by Marc A; 03-12-2009 at 01:03 AM.
Reply With Quote
  #6  
Old 03-12-2009, 03:20 PM
N8N N8N is offline
 
Join Date: Jan 2008
Location: Falls Church
Posts: 272
N8N
Default

Marc,

does your price include R&R or is this a "carry in" operation? I have a loud rattle under my car, not sure if it's the 5th gear or the TT, but it's got enough miles on it it could be either/both...

nate
__________________
--
'88 944 NA
'55 Studebaker Commander coupe (resto-rod)
ugly Ford truck
Reply With Quote
  #7  
Old 03-12-2009, 06:21 PM
Marc A's Avatar
Marc A Marc A is offline
 
Join Date: Dec 2002
Location: Herndon
Posts: 1,529
Marc A
Default

Hi Nate,

It takes over 5 hours to remove the torque tube from a street driven 944 so it's definitely a bring it to me or meet me somewhere convenient for both of us.
__________________
'05 Mustang GT
'08 E350
'06 LR3
'86 951 LS1 (C-2) Gone
'77 911 3.2 (C-1) Gone
3.2 Conversion and 915 Rebuild Home Page
The 958 Conversion
Reply With Quote
  #8  
Old 03-16-2009, 10:43 PM
Marc A's Avatar
Marc A Marc A is offline
 
Join Date: Dec 2002
Location: Herndon
Posts: 1,529
Marc A
Default

It seems as if there is more interest in providing a rebuilding kit than doing the rebuilding so here is what I can do:

4 ceramic hybrid bearings and delrin collars for 300.00 plus shipping.

I'm having trouble getting any more of the C4 clearance steel bearings so for now I'm only offering the ceramic bearings.

Please do not buy any kit with the C3 bearing or buy a bearing replacement that is C3 clearance as they will fail far sooner than you would like.

Here is a picture of the front and rear of the new bearing with collar installed.

__________________
'05 Mustang GT
'08 E350
'06 LR3
'86 951 LS1 (C-2) Gone
'77 911 3.2 (C-1) Gone
3.2 Conversion and 915 Rebuild Home Page
The 958 Conversion
Reply With Quote
  #9  
Old 03-19-2019, 11:47 PM
Por356s Por356s is offline
 
Join Date: Mar 2019
Location: NM
Posts: 1
Por356s
Default Need

Hi Marc. Any chance you still supply these? I'm looking for a set. Thanks!!



Quote:
Originally Posted by Marc A View Post
It seems as if there is more interest in providing a rebuilding kit than doing the rebuilding so here is what I can do:

4 ceramic hybrid bearings and delrin collars for 300.00 plus shipping.

I'm having trouble getting any more of the C4 clearance steel bearings so for now I'm only offering the ceramic bearings.

Please do not buy any kit with the C3 bearing or buy a bearing replacement that is C3 clearance as they will fail far sooner than you would like.

Here is a picture of the front and rear of the new bearing with collar installed.

Reply With Quote
  #10  
Old 03-18-2009, 05:56 PM
Dimi 944's Avatar
Dimi 944 Dimi 944 is offline
Keep your eyes up!
 
Join Date: Jan 2008
Location: Frederick, MD
Posts: 786
Dimi 944
Default

Sounds like a great solution...I do not think I need it att but will bookmark this page for future reference. Also, PM'd you about the LS1 conversion.
__________________
Dimi P.
Flying Horse Motorsport LLC
www.fhmotorsport.com
flyinghorsemotorsport@gmail.com

1985.5 Porsche 944 3.0 16V Conversion - Track duty only!
1989 Porsche 944 $2 - Weekend toy
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump