[PigPen]

New-to-me 718. I just got my plates today and was horrified to see how the temp tags were mounted. The front has the normal drilled plate mount with two self-tapping screws at the top to secure the plate and none below. I can deal with that and make it better. The back just has two self-tapping screws right into the body. No buffer or protection at all. There is no way either of these would survive a wash without collateral damage. I've been looking around and finding stuff, but wanted to ask if you all if there is a rear plate bracket or mount that works for you?

[Trak Ratt]

I’ve been looking for one too. Don’t care for the ones that use the tow hook mounting point.

[hoophead]

Same problem with the 991.

This looks like a decent solution, but I haven't tried it:
https://www.carpokes.com/viewtopic.php?f=10&t=169

Pictures that load here:
https://rennlist.com/forums/991/1046...ispreloading=1

[Trak Ratt]

^ thanks, but those look like rear mounts? I’m looking for a front license mount.

[hoophead]

Right - OP was asking about rear.

Fronts have the same problem too and no good non-drill solution that I've seen. I tried a tow hook mount there but it is _ugly_ and wants to rotate. Lately just been leaving the front plate in my glove box

[Trak Ratt]

^ Right, I keep mine in the fronk.

[PigPen]

Originally Posted by hoophead

Same problem with the 991.

This looks like a decent solution, but I haven't tried it:
https://www.carpokes.com/viewtopic.php?f=10&t=169

Pictures that load here:
https://rennlist.com/forums/991/1046...ispreloading=1

That looks promising. Thanks!