[jschmidt63]

Guys

My mechanic's machine shop he used is no more so can anyone recommended a Va shop that can do a fly cut and valve job including valve guides for air cooled heads?

thanks!

John

[Puffinator]

Originally Posted by jschmidt63

Guys

My mechanic's machine shop he used is no more so can anyone recommended a Va shop that can do a fly cut and valve job including valve guides for air cooled heads?

thanks!

John

Send to Anchor Atlantic in NJ. Do a search on this site for references.

[jschmidt63]

thanks!

[vascott99]

Originally Posted by Puffinator

Send to Anchor Atlantic in NJ. Do a search on this site for references.

I just recently sent my out and they did a awesome job...

http://www.precisionheads.com/

[ducatithunder]

+1 on Bob @ Anchor

[Gordo]

http://www.performanceautoworkswv.com

These guys are relatively local (nice fall drive & save's shipping $$$...).

They refreshed my 3.2L heads: fly cut, new valve guides, 5 angle valve seats & valves cut, checked my springs & valves and removed a couple of stubborn exhaust studs & rethreaded with time-serts.

Price was ~ $800 with about a 2 week turn around (I wasn't pressed for time).

They do quite a bit of Porsche work and were very knowledgable.

Gordo

[rothaus]

Originally Posted by Gordo

http://www.performanceautoworkswv.com

These guys are relatively local (nice fall drive & save's shipping $$$...).

They refreshed my 3.2L heads: fly cut, new valve guides, 5 angle valve seats & valves cut, checked my springs & valves and removed a couple of stubborn exhaust studs & rethreaded with time-serts.

Price was ~ $800 with about a 2 week turn around (I wasn't pressed for time).

They do quite a bit of Porsche work and were very knowledgable.

Gordo

This is good to know

I sent my 3.6 heads to Ollie's Engineering. The heads came back like new.



Here is his price list for comparison

http://www.olliesmachine.com/uploads..._List_0814.pdf

Cheers
Engelbert

[jschmidt63]

Thanks Guys

I think they are going to Anchor but Performance and Ollies look like good options.

BTW Engelbert, good seeing you at Verona AX, like the new wheels on your T.