boiling break fluid? - Dorkiphus.net

Porsche Technical Discussions Porsche related technical discussions and questions go here.

Reply
 
Thread Tools Display Modes
  #1  
Old 04-25-2008, 05:00 PM
cmcfaul@aol.com cmcfaul@aol.com is offline
need for speed
 
Join Date: Oct 2003
Location: Centreville, VA
Posts: 800
cmcfaul@aol.com
Question boiling break fluid?

Driving from DC to Fairfax yesterday my brake peddle got EXTREMELY hard. I could tell a caliper(s) was / were dragging. The car did not pull in any direction when breaking or coasting. Bumper to bumper traffic on 66 the left rear starts making a loud popping noise. I think the fulid (blue racing fluid 2 years old) boiled and the steam pushed past the caliper piston. Totally guessing and open to other opinions.

Question, would a dragging caliper cause the fluid to boil? Anyone experienced anything similar. I rebuilt the calipers a few years ago and put new pads on a month ago.

After the loud popping noises the breaks got much better and were basically normal by the time I got to my office.

Suggestions appreciated

Chris

73 911 E
__________________
Chris M

73 911 E
89 Carrera
Reply With Quote
  #2  
Old 04-25-2008, 05:04 PM
vascott99's Avatar
vascott99 vascott99 is offline
 
Join Date: Sep 2005
Location: Clifton, va
Posts: 1,115
vascott99
Default

pedal bushings the culprit?
__________________
Scott

1979 930 - Black on Black and in the woods

"My third child that will cost more in the long run"

2008 M3 - Gone
Reply With Quote
  #3  
Old 04-25-2008, 05:07 PM
Vicegrip's Avatar
Vicegrip Vicegrip is offline
Porkchop & SGB for prez!
 
Join Date: Jan 2003
Location: The other Woodstock.
Posts: 13,278
Vicegrip has seven HoF threadsVicegrip has seven HoF threadsVicegrip has seven HoF threadsVicegrip has seven HoF threadsVicegrip has seven HoF threadsVicegrip has seven HoF threads
Default

Yes a dragging binder can boil fluid. Pedal bushings is a good place to start. An old rubber line can close up and clog causing the same symptoms too. I bet you got the caliper so hot the seals roasted and that is why you saw smoke/steam. Burning brake fluid looks white like steam as it is glycol based. Rebuild all calipers that are sticking or are not freshly done and replace any older lines and likely the rotor too. Calipers go bad fast if street/track driven, rebuilding is no problem.
__________________
http://vimeo.com/29896988

“Those that can make you believe in absurdities can make you commit atrocities.” Voltaire.

"There is grandeur in this view of life...." Darwin.

The mountains are calling and I must go.

“The earth has music for those who listen”
Shakespeare.

You Matter.
(Until you multiply yourself times the speed of light squared. Then you Energy)

“We’ve got lots of theories, we just don’t have the evidence’.
Reply With Quote
  #4  
Old 04-25-2008, 08:35 PM
racer's Avatar
racer racer is offline
 
Join Date: Jul 2004
Location: South Riding, Va
Posts: 7,237
racer
Default

Damn homynyms.. break.. brake..
__________________
Dave
- 1970 914-6
Past
- 2000 Boxster
- 1987 944
- 1987 924S
- 1978 911 Euro SC
- 1976 914 2.0
- 1970 914 1.7 / 2056cc
Reply With Quote
  #5  
Old 04-27-2008, 02:27 PM
cmcfaul@aol.com cmcfaul@aol.com is offline
need for speed
 
Join Date: Oct 2003
Location: Centreville, VA
Posts: 800
cmcfaul@aol.com
Default

The problem persists but I felt the brake calipers and they were not very hot. The pedal moves freely and the car does not pull to any one side. During a long drive down 66 yesterday the pedal got EXTREMELY hard yet I had not used the brakes much. The car coasted freely (no drag).

It's nice haveing a firm pedal but it feels as if it might break somthing because of the extreme built up pressure.

Thanks,

Chris
73 911 E
__________________
Chris M

73 911 E
89 Carrera
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump