[Dandelion]

Hi all,

I'm looking for someone (local preferred, but internet/mail order OK) that can provide some custom sized vinyl stripes for the car. Specifically:

- 2" x 240" (20') roll in one solid color
- 11" x 240" (20') roll in a different solid color

- 18" diameter circle gloss white x 3
- 11" diameter circle gloss white x 1

Some searching either turns up people who want to sell me:
- an uncut 15" x 30 foot roll (one raw material size)

or

- a cut to width roll that's 150 feet long (another raw material roll length).

Is this something that Fastsigns can do?

Thanks in advance,
ed

[BlackTalon]

Ed:

I think you accidentally posted this on dorkiphus instead of emailing it to Fastsigns



I suspect no one wants to fuch up a 30 foot roll to do this, as they might have a hard time using up the narrower width. If you offer to buy the full 30 foot roll you can probably get the vendor to cut a 2 inch strip as part of the deal.

[Dandelion]

Originally Posted by BlackTalon

Ed:

I think you accidentally posted this on dorkiphus instead of emailing it to Fastsigns



I suspect no one wants to fuch up a 30 foot roll to do this, as they might have a hard time using up the narrower width. If you offer to buy the full 30 foot roll you can probably get the vendor to cut a 2 inch strip as part of the deal.

Yeah, that would be acceptable. But any sources locally?

ed

[HoodPin]

It's a bit out of your way, but I've done a bunch of vinyl sticker stuff at a little shop in Damascus MD, Roby's (http://robysphotoshop.com/). Friendly folks. Ask for Lyle, and tell him I sent you. I suspect he'll be able to give you quotes for everything you need. If you decide to use them but the drive is inconvenient for you, I may be able to pick the stuff up for you. Or if you do make it out there, maybe you can drive a wee bit further and stop by for a beer.

[Vicegrip]

Try Signs by Tomorrow in Tysons. (703) 356-3383 They have done this for others in the past and I have found them to be reasonable in pricing and consistent in workmanship. YMMV.

[Dandelion]

Thanks guys!

ed

[Fritz]

WetchCo Signs in Frederick also does outstanding work.

http://wetchco.com/

Brian does anything from full wraps, custom laser cut lettering, and laser etching and engraving. He did a great job with the boat this summer.

[Casey914]

If you saw our Daytona stickers from the event they were don't by a client of mine. He is in Annapolis and does great work. PM me if you want his details.

[Hunter]

And Design in Springfield may be able to help.

[Handlebar]

Originally Posted by Vicegrip

Try Signs by Tomorrow in Tysons. (703) 356-3383 They have done this for others in the past and I have found them to be reasonable in pricing and consistent in workmanship. YMMV.

I asked about a single stripe (10") and two smaller stripes next to it.

Signs By Tomorrow- pound sand, not interested.