Marc, thanks for taking the time to write down the detailed instuctions. I have printed this out and will go by this to tackle this project. I have lots of tools and a huge compressor to try to tackle this task. I'll try to use an impact wrench to break bolts loose and/or help from a torch like Jase said. Always had good success with a Mapp torch. It's the procedures I'm not sure off.
Are you going to replace the spring plate bushings or just lower the car??
I will possibly replace the bushings. Is this recommeded? I planned to since I saw pics from Vu's.
What is the ride height now, and where do you want it to be??
I have no idea what the ride height is. I would guess 27" from ground to fender.
What size tires are you running?
235/40/18 front & 285/35/18 rear.
Marc / Vu, I will PM you guys to for additional advice.
__________________
Jon Estrella
Werk 1 Euro 930S
K27-7200, Kokeln IC @ 1 bar boost., B&B front mount oil cooler, B&B headers and exhaust.
|