Quote:
Originally Posted by BlackTalon
I bought a big picture hanging parts set at HD last night, just to get two of the mirror clamps -- HD did not have any in small packs. I will try adhering it with JB weld and see if it has enough shear resistance to stay in place when clamped. Rivets are a great idea over screws. If the JB Weld fails I may be adding a rivet gun to my toolbox.
|
Although it will look worse, I'd rivet from the inside out for 2 reasons: (1) flatter on the inside where the air and filter are, and (2) stronger hold with the expanded part of the rivet in the metal clip instead of the plastic air box.
Good luck with the fix. Photos of the fixed air box, please!