Dorkiphus.net - View Single Post - Start Problem
Thread: Start Problem
View Single Post
  #2  
Old 11-18-2003, 11:22 PM
Marc A's Avatar
Marc A Marc A is offline
 
Join Date: Dec 2002
Location: Herndon
Posts: 1,529
Marc A
Default

Check all fuses if you haven't done that. Then

1. Check ground strap from Tranny to chassis for corrosion.

2. Jack up right side of car and hit starter with a hammer continuously while someone is trying to start the car. If nothing happens go to 3

3. Make sure that you have over 12 volts to the main terminal on the soleniod with the key OUT of the ignition. If no . . . battery is not charged or is bad or cable from battery to starter might have corroded internally and is no longer conducting the current efficiently

4. Make sure that the small wire (yellow I think) is getting 12 volts when the key is turned on (be careful reaching up there while starter is being turned).

5. Unplug and clean 14 pin connector and replug.

Let us know.
__________________
'05 Mustang GT
'08 E350
'06 LR3
'86 951 LS1 (C-2) Gone
'77 911 3.2 (C-1) Gone
3.2 Conversion and 915 Rebuild Home Page
The 958 Conversion
Reply With Quote