Those of you who know me realize that I have CRS disease, and with that preface here I go.
I sent out an e-mail a few weeks ago to many of you after I had read an article on a very simple upgrade to the fittings that are bolted to the intake side of the cam towers on each side of the motor. This fitting is attached to the banjo fitting connected to the oil line that feeds the cam towers and/or chain tensioners.
In any event, here is the part number: 901 105 361 01. This an old part number (i.e. 901 xxx) but the part has changed, so don't let anyone tell you that you already have them in your engine, because most likely you don't.
This upgrade is applicable to any 911 motor up to the 3.6, since this fitting are standard on the 3.6. I did it tonight and it took 10 min.
Since I don't know how to post pictures on this board yet, I'm going to post this on Pelican as well.
PS: CRS = can't remember shit