Most “experts agree that the front should be ˝” higher than the back. 24.5” in front is probally as low as you should go. If you have an SC or post ‘75 911 did you remove the large washer at the top of the front struts? If not you are probally pre-loading the front suspension to the point of binding. Try raising the rear pasenger side 1/8” to 1/4”, it should lower the drivers front about an equal amount. Anyway, you should be able to get 1.0 to 1.5 negative w/out modifying the struts. There is likely something else wrong if you cant but... if you really want, try Performance Products. I believe they sell non mono ball adjusters.
|