Quote:
|
Originally Posted by jazzbass
Big thanks to David Riley for helping me with this. I found that with the 205s on 7s, there going to be a little bit of rubbing on the front. I didn't take the car out on crappy roads with David's tires for obvious reasons, but the main point of the exercise was to see if 205s on 7s would fit with no modifications given my ride height (25.25"). On my car, the answer was no. So, since mods were needed, I decided to stick with the 225s up front. I trimmed part of the fender lip where it was rubbing and had no problems on our run on Saturday.
|
I had a similar problem with my Khumos untill I wore (from suspension lean, not rubbing) enough rubber off the "corner" to avoid rubbing. Maybe thats why the MPSC's are curved so much near the edge :P
Did you find the rubbing to be equal left and right? Mine rubs only on the drivers side (LHD, wisecrackers!)