Dorkiphus.net - S CAR GO headers, RUF speedlines 18", GT3 muffler, 993TT crank, Carillo rods

S CAR GO headers, RUF speedlines 18", GT3 muffler, 993TT crank, Carillo rods

In Ann Arbor, MI
Will ship at cost.

S CAR GO Equal Length, long tube headers
25" long, 1-3/4" primaries with 2.5" V-band connectors for Naturally Aspirated 911 air cooled engines.
I believe they are the same headers used by Singer on the green car.
There were used on a 964 3.6 L engine but is should be compatible with most air cooled applications (would also fit 993)
They were used by a customer for 30 min on a chassis dyno. The customer ended up wanting heat instead, so he had to change exhaust systems.
16ga 304S stainless steel tubing, TIG welded, Slip tubes into beautiful merge collectors with straps.
O2 sensor ports on both collectors if needed.

$OLD

----------------------------------------------------------------------------------

https://lh3.googleusercontent.com/-O...b2pcd14144.jpg
https://lh3.googleusercontent.com/-t...104_172223.jpg

RUF Speedlines 18x8.5 and 9.5 $OLD

Front: 8.5J x 18 with a ET61
Rear: 9.5J x 18 ET48.3
Excellent condition - Painted gloss back with red lips
There are some small chips in the red lips but no curbing. One wheel has a few chips in the black paint but nothing major. I imagine most people would refinish the wheels to their own liking, however they are painted nicely enough that if you like the colorway you could run them as-is. There are no bends or damage from what I can tell. Porsche center caps painted to match. I would consider trades for other 17" or 18" wheels in 964 NB fitment!

Additional pictures: https://picasaweb.google.com/1166959...7831/ForSale02

----------------------------------------------------------------------------------
https://lh3.googleusercontent.com/-A...104_183723.jpg

997 GT3 steel center exhaust muffler. $OLD
I was told this was taken off at 3k miles and replaced with a bypass. It certainly looks almost new. Tips are not included. Sharkwerks RS Light Weight Exhaust Tips 88mm tips are pictured ($350 new) that could be included for $250 extra. They are ceramic heat treated and 1+lb less then OEM tips.

----------------------------------------------------------------------------------

http://cimg4.ibsrv.net/gimg/rennlist...47c754b33d.jpg
Carrillo 993 twin turbo rods $OLD

http://cimg1.ibsrv.net/gimg/rennlist...bebd3f139d.jpg
9932102R 993 twin turbo crank shaft $2000
Both low hours in a 993 tt, excellent condition